 |
The work tables on most drill presses
are designed for working with metal. For working with wood, we need a larger
work surface and a more versatile way to clamp the work piece. This table, by
use of T-Track , hold down clamps, and toggle clamps permits accurate clamping
and positioning of the work piece.
The top is 18" wide by 12" deep. If
you prefer a larger one, it would be easy to simply increase the size of the
pieces. The top has a base made of 3/4" MDF board and is covered with 1/2"
plywood to accomodate a replaceable insert and five sections of T-Track. |
| The simple, but versatile fence is designed to be locked in place by
T-Track bolts. The T-Track can also be used for securing the work piece to the
table or securing jigs like our tenon jig and pocket hole jig. |
Note: Our drill press table plans are in PDF format. You need Adobe
Reader® to read and print these plans. If you do not
have Adobe Reader®, click
here.
|
|
|
