 |
Whether you call it
a Table Saw Jig, Table Saw Sled, or Crosscut Sled, this table saw accessory
will be one of the most important tools in your shop.
With typical miter
guages, the blade tends to pull the work away from the fence. This tool allows
you to clamp the workpiece at the exact angle you need. |
- Improved Safety: Holds the
workpiece firmly so you can keep your hands away from the
blade!
- Improved Precision: Allows you to
position the workpiece in unlimited positions. You can make precise and
repetitive cuts everytime.
|
- Versatile: Works as a precision
miter guage, taper jig, or general purpose table saw sled.
- Easy to build: Easy to follow
instructions show you how to build this Table Saw Jig from readily available
inexpensive materials.
|
| |
View
Larger Image |
|
View
Larger Image |
|
| |
The Table Saw Jig is a
precision miter gauge. You'll be overjoyed with the accuracy you'll get. |
|
Use your
Mitermate to set the Table Saw Jig fence to exact angles. |
|
| |
View Larger Image |
|
View Larger Image |
|
| |
Use it as a Table Saw
Sled for precision taper cuts. The T-Track allows you to position the fence in
virtually any angle. The universal fence has T-Track for the sliding stop block
and hold down clamps. The stationary mounted toggle clamps are not necessary
but often useful. |
|
Use your Table Saw Jig
to hold pieces that are too small to safely cut with a miter guage. You can get
repetitive and accurate cuts on even very small and odd shaped workpieces.
Keeps your hands safely away from the saw
blade! |
|
| |
|
|
|
|
Download instructions are at the bottom of the
page.
|
|
OUCH!
Have you ever nicked your hand while removing or installing your table saw
blade?
The Saw-Jaw protects your hands and provides a great way to safely
store your saw blades out of harms way when not in use.
|
|
Precision Tenon Jig
- For precision work on your table saw, this heavy duty tenon jig is your
best choice. The adjustable back stop will support stock from 0 degrees to 45
degrees. The width of the cut is controlled with a fine-threaded adjustment
knob. Constructed of cast iron and steel. |
|
Taper Jig - This
tool makes taper cutting easy and accurate. Cut tapers up to 3'' per
foot/15º slope. Graduated metal scale makes it easy to cut tapers at
desired angles. Easy to use and easy to adjust. Offers measurements in degrees
and inches per foot of taper. Works on either side of the fence. |
|
Rockler Table Saw
Sled -This Crosscut Sled features a large protractor scale way out at the
end of the fence, allowing you to precisely tune your angles for air-tight
miters and crosscuts. Easy-to-read 1/2° graduations and a hair-line
indicator ensure error-free setups. Heavy-duty aluminum fence features a
sliding flip-down stop. Spring-loaded ball bearings in the miter bar are
adjustable for a no-slop fit to the track and smooth, accurate cuts. |
|
|
